Quick release spring bar

Replacing the leather strap of a watch is the same as changing the tie of a suit. You can add more fun to your watch life by matching it with your shoes or bag, or by changing it depending on your mood that day or the season. Also, rather than using the same piece of leather for a long time, it will last longer if you replace several pieces. 

The "Quick Release Spring Bar" allows even beginners to easily replace the leather strap by simply pulling the lever with their fingernail without using any special tools. Especially when replacing a solid gold watch, there is a risk of the case being damaged by tools or spring bars, but using this spring bar minimizes the chance of the spring bar touching the case, thus reducing the risk of damaging the case. It also decreases. The best part is that you can change the leather in an instant, even on busy mornings .

Up until now, this was only available as an option for ordered products, but it can now be incorporated into ready-made products through post-processing. Since it is post-processed, a hole will be made in strap after processing, but it can be returned to the normal spring bar specification.

[Notes]
*It may not be possible to install it if the lug width is irregular, such as 18.5mm.
*If the spring bar hole is located close to the case (if the strap rubs against the case with a regular spring bar), it may not be possible to install it, so please check the hole position. Please check.

*Please note that this is only for quick release spring bars and does not include straps or watches.

The installation method is simple. Turn the watch face down and insert the side without the lever into the hole first. Push the leather strap into the lug, then pull the lever and insert the other spring bar into the hole in the case. Be sure to make sure that the lever is firmly seated.