Quick release spring bar processing

Replacing the leather strap of a watch, let alone a vintage watch, is the same as changing the tie of a suit.You can add more fun to your watch life by matching it with your shoes or bag, or by changing it depending on your mood that day or the season.Also, leather belts will last longer if you replace them several times rather than using the same one for a long time.

The "Quick Release Spring Bar" allows even beginners to easily replace the leather belt by simply pulling the lever with their fingernail without using any special tools.Especially when replacing the strap of a solid gold watch, there is a risk of the case being damaged by tools or spring bars, but using this spring bar minimizes the spring bar touching the case, thus reducing the risk of the case being scratched. This is the translation.The best part is that you can change the leather belt in an instant, even on busy mornings.

Until now, this was only available as an option for custom-made products, but it can now be incorporated into ready-made products through post-processing.Since it is post-processed, there will be holes in the belt after processing, but it can be returned to normal spring bar specifications.

【Precaution】
*It may not be possible to install if the lug width is irregular, such as 18.5mm.
*If the spring bar hole is located close to the case (if the belt rubs against the case with a regular spring bar), it may not be possible to install the product, so please check the hole location.

*Please note that this is only a process for quick release spring bars and does not include straps or watches.

Installation is easy; turn the watch face down and insert the side without the lever into the hole first.Push the leather belt into the lug, then pull the lever and insert the other spring bar into the hole in the case.Be sure to make sure that the lever is firmly seated.